Scalextric | EasyFit Digital Plug | SSD Chip Upgrade for DPR Compatible Cars | C8515

Scalextric Digital represents a ground-breaking step forward in the way
Scalextric is played. Now, with the DIGITAL system, up to six cars can race on
one lane*. At the press of a button, drivers can switch lanes for overtaking
and blocking! Most cars produced from 2007 onwards will have, as standard, a
socket on the car where the Easy Fit Digital Plug is connected to convert the
car for use on a SCALEXTRIC DIGITAL layout. C8515 Easy Fit Digital Plug is
suitable for fitting to standard DPR Scalextric cars. The conversion only
requires a small screw-driver and takes less than sixty seconds to convert a
DPR car.1: Unscrew the panel on the base of the car and disconnect the
braid-to-motor wiring plug.2: Connect the Easy Fit Digital Plug to the
braid-to-motor wiring plug.3: Replace the retaining screw to secure the Easy
Fit Digital Plug to the chassis. Features the Easy Fit Digital Plug offers
include: a 'plug and play' solution - DPR Scalextric cars to be digitized in
under sixty seconds.Each C8515 Easy Fit Digital Plug can be transferred easily
from one car to another. There is no need for a soldering iron or modelling
expertise.Please note: the C8515 Easy Fit Digital Plug is suitable for fitting
to standard DPR Scalextric cars. To convert open-wheeled single-seat F1 style
DPR Scalextric cars to Digital, use C8516 F1 Easy Fit Digital Plug. Many
non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005
and C7006.* Four car and six car powerbases availablePlease note: Once fitted
there may be issues running on an analogue track layout, however this digital
chip is easy to remove from the car and once removed will work on an analogue
track layout.